Web Analytics

Target Stands & Stakes Tactical Target Stands Llc

Target Stands & Stakes Tactical Target Stands Llc

Compare prices for Target Stands & Stakes Tactical Target Stands Llc You can order Target Stands & Stakes Tactical Target Stands Llc after check, compare the costs and check day for shipping. Some people are are interested Target Stands & Stakes Tactical Target Stands Llc on the cheap price. While the item could possibly be priced similarly at different shops.

Content:

Target Stands & Stakes Tactical Target Stands Llc.

$52.49 - $79.99
Quickly adjusts from 15 ½” to 27 ½” (measured from center of lathe) Compact and simple to transport ...

Product Description

Easy To Set Up, Easy To Adjust Steel Target Stands

  • Quickly adjusts from 15 ½” to 27 ½” (measured from center of lathe)
  • Compact and simple to transport – just 18” x 17” x 7”
  • Accommodates nominal 1” x 2” furring strips for anchoring targets
  • Tighten furring securely in stand with set screws
  • Use center set screw to anchor stand at desired width
  • Four optional 7/16” stakes keep stand from falling or blowing over
  • Powder-coated heavy duty steel tubing
  • Made in the USA
  • 2x4 model accommodates standard 2x4s  and is 19-1/2” x 19-1/2” x 7-1/4”
  • 2x4 model adjusts from 19-1/2” to 29”

SPECS: Powder-coated steel, 18” (45.7cm) long, 17” (43.2cm) wide, 7” (17.8cm) tall.

Laser Training System Laserlyte.

$98.99
Helps you train without going to the range or burning up ammo. Simply insert the laser training cartridge unit into the chamber ...

Product Description

Realistic, Anywhere/Anytime Practice Without Expending Ammo

Helps you train without going to the range or burning up ammo. Simply insert the laser training cartridge unit into the chamber like an ordinary cartridge. When you pull the trigger, the firing pin activates a switch that turns on the bright red laser dot to indicate the “bullet” impact point. Activates for 100 milliseconds each time the firing pin strikes. Use it to “call the shots” on any standard target or, for a more interactive experience, with the Training Target sold below. Rimless housing prevents the LTS from being extracted and ejected when you rack the slide—perfect for tap/rack/bang malfunction drills. Soft brass housing is fitted with two rubber O-rings to prevent damage to the chamber.


1911, Issue:09, Page:049
Big Book Catalog, Issue:68, Page:405
Sinclair, Issue:2X, Page:018

Brass, natural finish, rubber O-rings. Red laser dot. Runs on three Type 377 button-cell batteries, included, good for approximately 3,000 shots. Instructions included.

Us Popper Target, 28 Complete W/hinged Base Mgm Targets.

$229.99
Durable 500 Brinell steel construction Heavy-duty white finish for easy visibility Falls back ...

Product Description

  • Durable 500 Brinell steel construction
  • Heavy-duty white finish for easy visibility
  • Falls back when hit
  • Lightweight and easy to transport
  • 28 inches tall
  • Includes manufacturer's warranty

Practice makes perfect and the US Popper Complete with Hinged Base from MGM Targets makes practice fun and easy. This popper is a staple for action shooting and is lightweight enough to carry with you anywhere. It stands 28 inches tall and is made of hardened 500 Brinell steel with a durable white finish. This is a must-have for every range. Comes with manufacturer's warranty.

SPECS: 500 Brinell steel construction, White finish, 28 inches tall, Manufacturer's warranty.

Commercial Grade Plate Rack Challenge Targets.

$1,495.00
The Challenge Targets Commercial Grade Plate Rack Target was designed to handle heavy workloads in extreme conditions required by professional shooters, commercial ...

Product Description

Versatile Plate Rack Target for Hours of Range Time

The Challenge Targets Commercial Grade Plate Rack Target was designed to handle heavy workloads in extreme conditions required by professional shooters, commercial ranges and competition matches.

  • Durable patent pending design with reversible target plates
  • Rated for handguns (minimum distance 10 yards)|Rated for rifles (minimum distance 100 yards)
  • Maximum (at the target) velocity = 3,000 fps.
  • Maximum (at the target) energy = 1,300 ft. / lbs.
  • Includes (6) 3/8" thick x 8" diameter AR500 steel plates
  • Sturdy 5/16" steel angle iron legs

Plates can be rotated 45 or 90 degrees making the Plate Rack Target a versatile and fun target exercise!

Sight-In Target Champion Targets.

$16.99
Designed specifically for sight-in and group shooting with scoped guns. Bold, 90° lines help in lining up crosshairs. Grid di-vided into 1 squares; ...

Product Description

Makes Sighting-In Scopes So Much Easier

Designed specifically for sight-in and group shooting with scoped guns. Bold, 90° lines help in lining up crosshairs. Grid di-vided into 1" squares; simplifies windage  elevation setting. Brilliant, flourescent or- ange color. Check settings on rangefinder scopes, too. Complete instructions.


AR-15, Issue:04, Page:062
Big Book Catalog, Issue:68, Page:401
SPECS: 16" (40.6cm) x 16" overall. 12" (30.5cm) x 12" grid. Pak of 100.

At1 Trap Thrower, Single Stack, 50 Targets Cap Atlas Trap Co, Inc..

$799.99
Heavy-duty stainless steel construction Aluminum throwing arm with polyurethane throwing strip Instant release ...

Product Description

  • Heavy-duty stainless steel construction
  • Aluminum throwing arm with polyurethane throwing strip
  • Instant release keeps your reflexes sharp
  • Fully automatic so all you have to do is aim and shoot
  • Simple and reliable direct drive, no chain or sprocket
  • Angle adjustment, both axis
  • 25 foot push button release cord
  • Capacity: 50 targets in a single stack
  • Quick cycle time: 0.6 seconds
  • Quality product, made in the USA
  • Dimensions: 32 L x 30 W x 37 H inches
  • DuraClutch Lifetime warranty, 5 year limited manufacturer's warranty

The Atlas Single Stack Trap Thrower brings the range to you. This fully automatic trap thrower makes it easy to create a professional quality trap range virtually anywhere. It is well made of heavy-duty stainless steel that is rust resistant and has an aluminum throwing arm and polyurethane throwing strip to smoothly launch standard clay targets. It holds a single stack of 50 clay targets and has a quick 0.6-second cycle time. This trap is made in the USA and is powered by a 12-volt deep cycle battery, not included. It was designed with the simple and dependable electronics of a direct drive so there's no chain or sprockets and very little battery drain. It all adds up to a great trap thrower that will keep you target shooting for years to come.

SPECS: Heavy-duty stainless steel, Rust resistant, Aluminum throwing arm, Polyurethane throwing strip, Instant release, Fully automatic, Direct drive, Angle adjustment, 25 foot push button release cord, 50 targets, 0.6 second cycle time, Includes a 5-year manufacturer's limited warranty plus a lifetime manufacturer’s warranty on DuraClutch.

Idpa/ipsc Target Stands Nevco Targets.

$31.99 - $38.99
Compact, lightweight construction for easy use. Rigid steel channels accept nominal 1" x 2" furring strips to support your target. Units are stackable ...

Product Description

Compact & Lightweight For Easy Transport & Setup

Compact, lightweight construction for easy use. Rigid steel channels accept nominal 1" x 2" furring strips to support your target. Units are stackable to minimize storage space and decrease setup time. Approximately 18½" wide to fit all standard IPSC targets. Extra deep channels provide added target leg support. Standard model features two adjustable thumbscrews that provide a tight hold on the furring strips, and welded steel outriggers with two holes each for anchoring the stand with ground spikes. Folding model folds flat for even easier storage and transport. Drive-In model features a 10" long heavy-duty steel spike with a 2" x 2" square striking head for driving into the ground with your foot or a hammer.


Big Book Catalog, Issue:68, Page:401

SPECS: Steel, black, matte finish. Standard - 20¾" (52.7cm) long, 14½" (36.8cm) wide, 4" (10.2cm) high. 3 lb. 13 oz. wt. Folding - 19" (48.3cm) long x 5" (12.7cm) high x 1" (2.5cm) thick (folded). 3 lb. 2 oz. wt. Drive-In – 18" (45.7cm) long x 15½" (39.4cm) high x 1" thick. 3½ lb. (1.6kg) wt. Furring strips not included.

  • Tags: 1911, frame, slides, parts, accessories, lower, 45 acp, receiver, upgrades, custom, kits, complete, coltparts, samuelcolt, woodsman, commander, 1911 government
Write a Comment

Your email address will not be published. Required fields are marked *

Sign up for Send Newsletter